TITEBOND MELAMINE GLUE


Titebond Melamine Glue is designed for bonding wood, particleboard, MDF and other porous substrates to synthetic materials such as melamine, vinyl and HPL as well as metals. It offers a fast initial tack, yet has a longer open time that allows for the accurate alignment of working materials. Titebond Melamine Glue is a water-based a...

more

Features & Benefits

check_circle
Bonds melamine, vinyl coated products, and HPL to porous materials
check_circle
Thicker formulation - fewer runs and drips
check_circle
Fast setting - Excellent strength
check_circle
Dries clear
check_circle
Long open time
check_circle
Fast initial tack

Application Guidelines

Application Temperature:
Above 40°F (4°C)
Open Assembly Time:
5 minutes (70 °F./50%RH)
Total Assembly Time:
10-15 minutes (70°F./50%RH)
Minimum Required Spread :
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure:
Enough to bring joints tightly together (generally, 30-80 psi for HPL,100-150 psi for softwoods,125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application:
Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
Cleanup:
Damp cloth while glue is wet. Scrape off and sand dried excess.
Limitations:
Titebond Melamine Glue is not intended for exterior use or where moisture is likely. Not for structural or load bearing applications. Vacuum pressing should only be used for veneers up to 1/16 inch in thickness. Do not use when temperature, glue or materials are below 40°F. If product has been frozen (gel-like appearance), it cannot be used. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF REACH OF CHILDREN.

Physical Properties

Type
Specialized vinyl acetate emulsion
Calculated VOC
77 g/L
State
Liquid
Weight Per Gallon
8.6 lbs .
Color
White
Dried Film
Clear
Flashpoint
> 200°F
Solids
57%
Freeze / Thaw Stability
Unstable
Viscosity
12,000 cps
pH
4.0
Chalk Temperature
To assure a good bond, 40°F is the lowest recommended temperature of the glue, air and materials during application.
Storage Life
24 months in tightly closed containers at 75°F

Bond Strength ASTM D-905

Substrates Strength Substrate Failure
Melamine/Melamine Lap Shears 329 psi 100%
Melamine/particle Board 339 psi 100%


Specifications

  • CONFORMS TO ASTM D-4236

Caution Statement

CAUTION: EYE AND SKIN IRRITANT. Contains oxydipropyl dibenzoate and dipropylene glycol n-butyl ether. Do not swallow. Do not allow eye contact or prolonged skin contact. FIRST AID: If swallowed, do not induce vomiting; contact physician. If eye contact occurs, flush with water for 15 minutes. Wash skin contact areas with soap and water. If irritation from eye or skin contact persists, contact physician. For additional information, refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.