TITEBOND LANDSCAPE CONSTRUCTION ADHESIVE

Titebond Solvent-Based Landscape Construction Adhesive is specifically designed for use on pavers, retaining walls, stone, brick, block, wood and most common building materials used in landscaping. The professional strength formula is waterproof and works well in extreme weather conditions to provide a long lasting bond.

Features & Benefits

  • Recommended For: Installation of landscape materials for retaining walls, capstones, planters and walkways.
  • Compatible Materials: Common landscaping materials including wood, brick, stone, concrete, metal, timber, block and slate.
  • Bonds wet & frozen landscape materials
  • Solvent-based
  • Extreme temperatures
  • Superior strength and stability
  • Waterproof
  • Strong durable bond

Specifications & Certifications

  • Exceeds APA AFG-01, ASTM D3498 and ASTM C557. Certified for use with FHA/HUD UMB #60.

Application Guidelines

  • Application Temperature: 0°F to 100°F
  • Service Temperature Range: -20°F to 120°F
  • Working Time: Approximately 10-20 minutes for a 1/4" bead
  • Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
  • Application: Cut tip on slant for 1/4” to 3/8” bead. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead. Wet blocks must dry within 48 hours for adhesive to adhere properly. Retaining Wall Caps: Apply 1/4” to 3/8” bead around the perimeter of the underlying block 2” from edge. Press firmly in place to ensure adequate adhesive contact. Landscape Blocks: Apply two 1/4” beads of adhesive, front and back on each block. Press firmly in place to ensure adequate adhesive contact. Apply blocks to adhesive within 20 minutes when temperature is 70°F. If temperature is above 70°F, reduce time to 10 minutes or less. Allow at least 48 to 72 hours before foot traffic and 5 to 7 days for heavy traffic.
  • Cleanup: Tools and adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions.

Coverage

Size1/8” Bead1/4" Bead3/8" Bead1/2" Bead
28 Oz. Cartridge355 ft.86 ft.39 ft.21 ft.


Physical Properties

  • Type: Synthetic elastomeric polymer
  • State: Medium-viscosity mastic
  • Color: Light tan
  • Solids: 65%
  • Viscosity: 130,000 cps
  • VOC: > 275 g/L
  • Flashpoint: < 0°F
  • Freeze / Thaw Stability: Stable
  • Storage Life: 18 months in tightly closed containers at 75°F
  • Odor: Solvent (strong)

Limitations

Not designed for continuous submersion or for use on plastics, polystyrene or polyethylene foams. Do not adhere one non-porous material to another since this will slow or prevent drying.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per Pallet
31320370830313241003708303132128 Oz. Cartridge26.691244
Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com

Franklin International